1 Overview
Medical gloves are rubber film products made of high-quality natural latex as the main raw material, molded by coagulant dipping, and dried. This product is divided into a pair for medical operations.
2, use
Medical protective gloves Medical gloves are generally used as protective equipment for medical operations. They can protect the skin of the operator from injury and infection, and prevent the operator’s body from being soaked by bacteria and dirt carried by the operator.
3. Main production areas and export areas
Medical gloves my country’s export latex inspection gloves are mainly distributed in Shanghai, Tianjin, Jiangsu, Guangdong and other places, and the products are mainly sold to the United States, Canada and Western Europe.
4, test method
According to the regulations of GB7543-96, heavy and light gloves will be inflated one by one, and the rubber membrane will be inspected manually after swelling about once. The wrist opening can be stretched out by hand (the fingers are generally not spread out). If a defect is found, the wrist can be partially enlarged twice for inspection.
The length (total length from the middle of the fingertip to the vertical direction of the wrist) and width (1/2 of the circumference of the palm at the base of the thumb) of the glove are measured by flattening the product and measuring with a millimeter scale.
Use a rubber thickness gauge with a 0.01mm scale to measure the thickness, and then calculate the thickness of the single layer. The arithmetic average is taken from three points at the measurement position: fingers (approximately 10 mm from the top of the middle finger), palm (near the center), and wrist (approximately 25 mm from the side), but the thickness of the thin part should not be less than 1 of the thickness of the thick part /2.
The testing method of the physical and mechanical properties of gloves must be carried out in accordance with the above standards.
